Hero section — 10.0.0.1

10.0.0.1 Router Login

10.0.0.1 is a private IP address, and for a lot of home routers it’s the default gateway. Brands like Comcast/Xfinity and Cox gateways use this IP most often, and you can spot it on certain Motorola and Netgear models too. From here, you can get into your router settings and make changes to your WiFi.

Router / Gateway
IP address
10.0.0.1
Admin URL
http://10.0.0.1Port 80 · HTTP
Username
adminMost common
Password
On device labelOr admin / password
Network
10.0.0.1.0 /24Private · RFC 1918
Section — Common Router IP Addresses

Common router IP addresses

Router login addresses aren’t universal. Yours might be 10.0.0.1, but plenty of other routers use 192.168.1.1, 192.168.0.1 or even 192.168.100.1, and it all depends on the brand and model. So if you typed an address and nothing loaded, that is normal. Look through the list of common gateway addresses below and try the one that matches your router. One of them should pull up the login page in seconds.

  • 192.168.1.1

    TP-Link, Netgear, Linksys, ASUS, Zyxel and most ISP-supplied routers

  • 192.168.0.1

    TP-Link, D-Link, Netgear, Belkin, Tenda and Huawei

  • 192.168.2.1

    Belkin, SMC, Sitecom and some Netgear and Linksys models

  • 192.168.1.254

    BT, Arris, 2Wire and TP-Link or Huawei DSL modems

  • 192.168.10.1

    TRENDnet, Motorola, SMC and many standalone access points

  • 192.168.8.1

    Huawei portable 4G and 5G routers, and most MiFi hotspots

  • 192.168.100.1

    Cable modems and fibre ONTs from Arris, Motorola, Huawei and Nokia

  • 10.0.0.1

    Xfinity, Comcast, Cisco and many ISP-managed gateways

  • 192.168.11.1

    Buffalo routers and several Japanese-market models

  • 192.168.123.254

    Older ADSL routers from Aztech, Zonet, LevelOne and Micronet

  • 192.168.3.1

    Huawei home routers, Honor units and some Vodafone gateways

  • 192.168.0.254

    TP-Link, D-Link and Comtrend ADSL modems

  • 10.0.0.138

    Older Comcast, SpeedStream and Motorola cable modems

Section — How to Log in to 10.0.0.1

How to Log in to 10.0.0.1?

Your router’s settings page is just a browser away — let’s type 10.0.0.1 in the address bar and you’re in. Two things first, though: your phone or computer needs to be on that router’s network, and you’ll need the router’s username and password. Got both? Type 10.0.0.1 in the address bar and the login page comes up.

  1. Connect to Your Router

    Connect your phone or computer to your router’s WiFi. You can also use an Ethernet cable on a computer or laptop.

  2. Open a Browser

    Open your preferred browser. Chrome, Safari and Firefox all work.

  3. Go to 10.0.0.1

    Type 10.0.0.1 at the top. Press Enter, and you will land on the router’s login screen.

  4. Enter Your Username and Password

    Use your own router’s username and password on the login screen. Not sure what they are? Take a look at the sticker on the back of the router. You can also check our default password list below.

  5. Log In

    Press Login. If the details are correct, your router settings will open and you can make the changes you need.

Section — Default Router Usernames and Passwords

Default Router Usernames and Passwords

If you have never changed the login details of your router, there is a good chance it still has the default username and password. Just keep in mind that these defaults only work if nobody has changed them in the past. Here is the list of addresses with their usernames and default passwords.

BrandLogin IPUsernamePassword
TP-Link192.168.1.1adminadmin
D-Link192.168.0.1admin(blank)
Netgear192.168.1.1adminpassword
Linksys192.168.1.1adminadmin
Asus192.168.1.1adminadmin
Huawei192.168.8.1adminadmin
ZTE192.168.1.1adminadmin
Tenda192.168.0.1adminadmin
PTCL (Modem)192.168.1.1adminadmin
Belkin192.168.2.1admin(blank)
Cisco192.168.1.1adminadmin
Xiaomi / Mi192.168.31.1adminadmin
Ubiquiti192.168.1.1ubntubnt
MikroTik192.168.88.1admin(blank)
Zyxel192.168.1.1admin1234
Sagemcom192.168.1.1adminadmin
Motorola192.168.0.1adminmotorola
Buffalo192.168.11.1root(blank)
SMC192.168.2.1adminsmcadmin
Actiontec192.168.1.1adminpassword
Arris192.168.0.1adminpassword
Edimax192.168.2.1admin1234
Comtrend192.168.1.1adminadmin
DrayTek192.168.1.1adminadmin
No brand found. Check the sticker under your router — the default login is usually printed there.
Section — How to Log in to 10.0.0.1

How to Log in to 10.0.0.1?

Your router’s settings page is just a browser away — let’s type 10.0.0.1 in the address bar and you’re in. Two things first, though: your phone or computer needs to be on that router’s network, and you’ll need the router’s username and password. Got both? Type 10.0.0.1 in the address bar and the login page comes up.

  1. Connect to Your Router

    Connect your phone or computer to your router’s WiFi. You can also use an Ethernet cable on a computer or laptop.

  2. Open a Browser

    Open your preferred browser. Chrome, Safari and Firefox all work.

  3. Go to 10.0.0.1

    Type 10.0.0.1 at the top. Press Enter, and you will land on the router’s login screen.

  4. Enter Your Username and Password

    Use your own router’s username and password on the login screen. Not sure what they are? Take a look at the sticker on the back of the router. You can also check our default password list below.

  5. Log In

    Press Login. If the details are correct, your router settings will open and you can make the changes you need.

FAQ — 10.0.0.1

Frequently Asked Questions

What is 10.0.0.1?
10.0.0.1 is a private IP address. Some routers use it for their settings page. If your router uses this address, type it into your browser and log in to change your WiFi settings.
Is the WiFi password the same as the router login password?
No. Your WiFi password connects your devices, like a phone or computer, to the network. The router login password is what lets you into the router’s settings.
Can I open 10.0.0.1 from my phone?
Yes. Connect your phone to your home WiFi, then open 10.0.0.1 in your browser.
Does a factory reset delete my WiFi password?
Yes. A factory reset clears your WiFi name and password and puts back the ones printed on the router’s sticker. Because the name and password change, you have to reconnect all your devices.

Scroll to Top